content loaded
Please sign in to view pricing, availability, and to add to cart.
Overview
Specifications
Documents
Product Overview
The MIC2S module has an electronically-balanced input with screw terminal connector. It has an interface with low-impedance dynamic microphones. It also has an interface with electret condenser microphones and an internal 24V DC phantom power supply to provide the bias supply that is enabled by a PCB jumper. The module has a gain control that will allow the gain to be adjusted from 18 dB to 62 dB and the ability to mute lower priority modules and be muted by higher priority modules. The module is able to assume any of 4 priority levels. The module has a VOX/gating circuit to control muting of lower priority modules and its internal gating circuit with a threshold control. It has a built-in limiter, with a threshold control, to limit the maximum output level of the module. The module has bass and treble controls with cut only of 10 dB at 100 Hz and 3 kHz, respectively. The module also has a voice enhancement control for improving voice intelligibility. The module’s output is assignable to either or both of two mixing buses.
Specifications
ADI Part Number BO-MIC2S Brand Name Bogen Manufacturer Bogen Communications International, Inc Manufacturer Part Number MIC2S Product Model MIC2S Product Name MIC2S Microphone Input Module Product Series MIC Product Type Microphone Input Module
ADI Part Number Replaces BO-MIC1S Model Number Replaces MIC1S
Depth 3.5" Height 3.1" Weight 2.20oz Width 1.4"
Limited Warranty 3-Year
Additional Information - Gain/Trim control
- Hi-cut/Lo-cut controls
- Voice enhancement control
- Noise gate with threshold control
- Limiter with threshold control
- 24V phantom power
- Screw terminals: XLR connector
Country of Origin TW Features 24V Phantom power, Bus assignable, Electronically balanced, Gain and Trim control, High Cut and Low Cut controls, Voice Enhancement control