content loaded
Dortronics TJ1107XEDR 1100 Series Delayed Egress Actuating Lock for Single In-Swing Door with Z-Bracket, 600 lb, Clear Anodized Aluminum
TJ1107XEDR
|0L-TJ1107XED
Shop All Dortronics
Dortronics TJ1107XEDR 1100 Series Delayed Egress Actuating Lock for Single In-Swing Door with Z-Bracket, 600 lb, Clear Anodized Aluminum
TJ1107XEDR | 0L-TJ1107XED
Please sign in to view pricing, availability, and to add to cart.
Overview
Specifications
Documents
Product Overview
The TJ1107 Series Electro-magnet assembly mounts firmly and rigidly to the header using an L-Bracket. The armature is held by the Z-Bracket which mounts to the face of the door. Special hardware is used to allow the armature to automatically align with the face of the electromagnet for maximum holding force when the magnet is energized. A 2-1/4” wide flat surface is required to mount the TJ1107 series magnet and L-Bracket assembly (see Figure 1). For uneven or irregular surfaces, the use of shims or filler plates may be required. See the Application Bulletin (attached) for diagrams of typical door configurations and part numbers for spacers, filler blocks, shims and mounting brackets required for each type of installation For hollow metal door and similar installations requiring drilling and tapping, the material thickness should be at least 1/8”. Sheet metal screws may be used for wood doors and clad doors. For thinly clad doors or wooden doors without sufficient solid backing, a reinforcing plate may be required. Before starting, make sure the correct drill template is available for the type of installation planned. Door swing and construction, door frame material and configuration must be considered before deciding on the proper mounting kit and method.
Specifications
ADI Part Number 0L-TJ1107XED Brand Name Dortronics Manufacturer Part Number TJ1107XEDR Product Name TJ1107xEDR Electro-Magnetic Lock Product Series 1100 Product Type Magnetic Lock