Detector Accessories &amp; Bases

Secutron DUCT-ST5 Sampling Tube for MIX-4010-DUCT, Width 2-5' (1.5m)

DUCT-ST5|5T-DUCTST5

Secutron MRI-4003-LF 400 Series Low Frequency Sounder Base

MRI-4003-LF|5T-MRI4003L

Secutron MRI-4001 6" Detector Base

MRI-4001|5T-MRI4001

Honeywell Farenhyt Series

Farenhyt IDP-PHOTO-W-BP Intelligent Plug-in Photoelectric Smoke Detector, 10-Pack

IDP-PHOTO-W-BP|I2-IDPPHOWBP

SAE SSU-MS-KA/P/R SSU-RH/KA/P/R MS-Series Audible Remote Accessory for RW, SM and SL-Series Detectors, Two-Gang, Key Operated

SSU-RH/KA/P/R|O6-SSUMSKAPR

SAE SSU-MS-KA/RMS MS-Series Remote Accessory for RW, SM and SL-Series Detectors, Single Gang, Key Operated, Stainless Steel

SSU-MS-KA/R|O6-SSUMSKAR

DSC

DSC MXBASE Addressable MX Fire Base for MX916, MX926, MX936 Detectors

MXFBASE|3W-MXFBASE

Potter PAD300-6DB 6" Detector Base, Low profile, Surface-mount, White

PAD300-6DB|PL-PAD3006DB

Potter PAD300-LFSB Addressable Low Frequency Sounder Base

PAD300-LFSB|PL-PAD300LFB

Kidde KC2-SB4 Standard Smoke Detector Base with Trim Skirt, Terminals

KC2-SB4|ED-KC2SB4

Kidde KC2-RB KC2 Series Relay Base, 4-Terminals, Auxiliary Relay, 4" Diameter

KC2-RB|ED-KC2RB

Kidde KC2-SB Standard Smoke Detector Base, Compatible with AEGIS 2.0 and AEGIS-XLT

KC2-SB|ED-KC2SB

Potter PAD100-6B Addressable Detector Base, 6" (3992732)

PAD 100-6B|PL-PAD1006B

Fire-Lite Alarms by Honeywell

Fire-Lite OSP-002 OSID Smoke Detector Laser Alignment Tool

OSP-002|FL-OSP002

System Sensor WAV-WL SWIFT Wall Mount AV Base for L-Series AV Devices, White

WAV-WL|BK-WAVWL

More Options Available

System Sensor WAV-RL SWIFT Wall Mount AV Base for L-Series AV Devices, Red

WAV-RL|BK-WAVRL

More Options Available

Kidde KI-SB Detector Mounting Base Standard

KI-SB|ED-KISB

kidde low frequency audible (sounder) base for co and fire detectors

Kidde KI-ABLT Low Frequency Sounder Base for CO and Fire Detectors

KI-ABLT|ED-KIABLT

Edwards Signaling

Edwards Signaling SD-T42 Duct Detector Accessory, 42" Sampling Tube

SD-T42|ED-SDT42

Kidde GSA-LED Remote Alarm LED (not for EN54 applications)

GSA-LED|ED-GSALED

System Sensor RTS2 Multi-Signaling Accessory, without Strobe, for InnovairFlex 4-Wire Conventional Duct Smoke Detectors

RTS2|BK-RTS2

kidde 4-inch detector mounting base c/w trim skirt

Kidde KI-SB4 Standard Detector Mounting Base w/ 4-inch Trim Skirt

KI-SB4|ED-KISB4

kidde audible (sounder) base for co and fire detectors

Kidde KI-ABDT Audible Sounder Base for CO and Fire Detectors

KI-ABDT|ED-KIABDT

System Sensor DST5 Metal Sampling Tube for DNRE and D2E, Duct Widths 4' to 8'

DST5|BK-DST5

More Options Available

System Sensor SENS-RDR I3 Sensitivity Reader

SENS-RDR|BK-SENSRDR

System Sensor DST1 Metal Sampling Tube for DNRE and D2E, Duct Width up to 1' (0.3m)

DST1|BK-DST1

System Sensor DST1.5 Metal Sampling Tube for DNRE and D2E, Duct Widths 1' to 2'

DST1.5|BK-DST15

More Options Available

System Sensor DST3 Metal Sampling Tube for DNRE and D2E, Duct Widths 2' to 4'

DST3|BK-DST3

More Options Available

DUCT-ST55T-DUCTST5

Secutron DUCT-ST5 Sampling Tube for MIX-4010-DUCT, Width 2-5' (1.5m)

DUCT-ST5|5T-DUCTST5

Key Features

Compatible with MIX-4010-DUCT
Sampling tube width: 2' to 5' (1.5m)
Ideal for photoelectric duct smoke detectors

MRI-4003-LF5T-MRI4003L

Secutron MRI-4003-LF 400 Series Low Frequency Sounder Base

MRI-4003-LF|5T-MRI4003L

Key Features

Comprehensive Compliance Fully meets NFPA 72 for low frequency sounder codes
Optimal Alarm Tone
Built-in alarm sounding capability for all MRI-4000 detectors

MRI-40015T-MRI4001

Secutron MRI-4001 6" Detector Base

MRI-4001|5T-MRI4001

Key Features

Sleek low profile design
Ceiling or wall mountable
The base provides a device Anti-Tamper feature

IDP-PHOTO-W-BPI2-IDPPHOWBP

Honeywell Farenhyt Series

Farenhyt IDP-PHOTO-W-BP Intelligent Plug-in Photoelectric Smoke Detector, 10-Pack

IDP-PHOTO-W-BP|I2-IDPPHOWBP

Key Features

Save over purchasing 10 individual detectors
Less waste and packaging breakown onsite

SSU-MS-KA/P/RO6-SSUMSKAPR

SAE SSU-MS-KA/P/R SSU-RH/KA/P/R MS-Series Audible Remote Accessory for RW, SM and SL-Series Detectors, Two-Gang, Key Operated

SSU-RH/KA/P/R|O6-SSUMSKAPR

Key Features

UL Listed
compatible with RW, SM and SL Series duct smoke detectors.

SSU-MS-KA/RO6-SSUMSKAR

SAE SSU-MS-KA/RMS MS-Series Remote Accessory for RW, SM and SL-Series Detectors, Single Gang, Key Operated, Stainless Steel

SSU-MS-KA/R|O6-SSUMSKAR

Key Features

1-Gang
Product color; red, stainless steel
Product series MS

MXFBASE3W-MXFBASE

DSC

DSC MXBASE Addressable MX Fire Base for MX916, MX926, MX936 Detectors

MXFBASE|3W-MXFBASE

Key Features

Base for MX916, MX926, MX936 detectors
4 terminals for loop connection
LED aperture

PAD300-6DBPL-PAD3006DB

Potter PAD300-6DB 6" Detector Base, Low profile, Surface-mount, White

PAD300-6DB|PL-PAD3006DB

Key Features

Terminals marked with polarity to assist with installation
Duplicate terminals for in-and-out SLC wiring
Terminals accept 22 to 12AWG wire sizes

PAD300-LFSBPL-PAD300LFB

Potter PAD300-LFSB Addressable Low Frequency Sounder Base

PAD300-LFSB|PL-PAD300LFB

Key Features

Addressable low frequency sounder base, allows for single station, grouped or all call activation
May be mapped to any device connected to the control panel
Terminals accept 22 to 12 AWG wire sizes

KC2-SB4ED-KC2SB4

Kidde KC2-SB4 Standard Smoke Detector Base with Trim Skirt, Terminals

KC2-SB4|ED-KC2SB4

Key Features

Standard Base
4 Terminals
6″ Diameter

KC2-RBED-KC2RB

Kidde KC2-RB KC2 Series Relay Base, 4-Terminals, Auxiliary Relay, 4" Diameter

KC2-RB|ED-KC2RB

Key Features

Dual Rate-of-Rise and Fixed-Temperature Sensor
Self-diagnostic capability continually monitors operation
Compatible with Kidde Fire Systems AEGIS 2.0 and AEGIS-XLT Conventional Control Units

KC2-SBED-KC2SB

Kidde KC2-SB Standard Smoke Detector Base, Compatible with AEGIS 2.0 and AEGIS-XLT

KC2-SB|ED-KC2SB

Key Features

Compatible with AEGIS 2.0 and AEGIS-XLT
Connects Optica KC2 series detectors
Supports fire alarm initiating device circuits

PAD 100-6DBPL-PAD1006B

Potter PAD100-6B Addressable Detector Base, 6" (3992732)

PAD 100-6B|PL-PAD1006B

Key Features

Terminals marked with polarity to assist with installation
Duplicate terminals for in and out SLC Wiring
Terminals accept 22 to 12AWG wire sizes

OSP-002FL-OSP002

Fire-Lite Alarms by Honeywell

Fire-Lite OSP-002 OSID Smoke Detector Laser Alignment Tool

OSP-002|FL-OSP002

Key Features

The alignment of the detector is extremely intuitive, fast and accurate.
The eyeball moves +/- 20 ° in the vertical direction and 50° in the horizontal direction.

WAV-WLBK-WAVWL

System Sensor WAV-WL SWIFT Wall Mount AV Base for L-Series AV Devices, White

WAV-WL|BK-WAVWL

Key Features

Wireless installation
Class A mesh network
Addressable code wheels

More Options Available

WAV-RLBK-WAVRL

System Sensor WAV-RL SWIFT Wall Mount AV Base for L-Series AV Devices, Red

WAV-RL|BK-WAVRL

Key Features

Wireless installation
Class A mesh network
Addressable code wheels

More Options Available

KI-SBED-KISB

Kidde KI-SB Detector Mounting Base Standard

KI-SB|ED-KISB

Key Features

Next generation optical smoke sensing technology
Wide 0.53 to 3.94 %/'. (1.7 to 12.35 %/m) smoke obscuration
Automatic Device Mapping

KI-ABLTED-KIABLT

Kidde KI-ABLT Low Frequency Sounder Base for CO and Fire Detectors

KI-ABLT|ED-KIABLT

Key Features

The GSA-LED Remote LED is supported by this Base
Wide 0.53 to 3.94 %/'. (1.7 to 12.35 %/m) smoke obscuration
Uses ExistingWiring

SD-T42ED-SDT42

Edwards Signaling

Edwards Signaling SD-T42 Duct Detector Accessory, 42" Sampling Tube

SD-T42|ED-SDT42

Key Features

Less than 2" deep for easy installation and applicationsWhere space is tight
PCB mounted photoelectric sensor with on-board inteliigence
Environmental compensation with patented differential sensing

GSA-LEDED-GSALED

Kidde GSA-LED Remote Alarm LED (not for EN54 applications)

GSA-LED|ED-GSALED

Key Features

Remote LED connects to the GSA-SB or GSA-SB4 Standard Base only.
Features a North American size 1-gang plastic faceplate with a white finish and red alarm LED.

RTS2BK-RTS2

System Sensor RTS2 Multi-Signaling Accessory, without Strobe, for InnovairFlex 4-Wire Conventional Duct Smoke Detectors

RTS2|BK-RTS2

Key Features

Can be used to select one of two connected sensors to be tested, reset, or both by a push button switch.
Enables sensitivity measurements using the SENS-RDR sensitivity reader
Alarm without strobe: 30 mA max.

KI-SB4ED-KISB4

Kidde KI-SB4 Standard Detector Mounting Base w/ 4-inch Trim Skirt

KI-SB4|ED-KISB4

Key Features

The GSA-LED Remote LED is supported by this Base
Wide 0.53 to 3.94 %/'. (1.7 to 12.35 %/m) smoke obscuration
Uses ExistingWiring

KI-ABDTED-KIABDT

Kidde KI-ABDT Audible Sounder Base for CO and Fire Detectors

KI-ABDT|ED-KIABDT

Key Features

Designed for use where localized or group alarm signaling is required.
KI-ABDT bases provide sounder capability to KI Series smoke and heat detectors, as well as carbon monoxide detectors when used with a GSA-T3T4 Temporal Pattern Generator.

DST5BK-DST5

System Sensor DST5 Metal Sampling Tube for DNRE and D2E, Duct Widths 4' to 8'

DST5|BK-DST5

Key Features

High-quality metal construction for durability and resistance to damage
Easy installation and compatibility with a wide range of duct sizes
Compatible with duct smoke detectors for reliable and accurate smoke detection in HVAC Systems

More Options Available

SENS-RDRBK-SENSRDR

System Sensor SENS-RDR I3 Sensitivity Reader

SENS-RDR|BK-SENSRDR

Key Features

An LCD screen that displays sensitivity by percent-per-foot obscuration
Automatic shut-off a'er 30 minutes
Connectors for a hand-held device or threaded extension pole

DST1BK-DST1

System Sensor DST1 Metal Sampling Tube for DNRE and D2E, Duct Width up to 1' (0.3m)

DST1|BK-DST1

Key Features

High-quality metal construction for durability and resistance to damage
Easy installation and compatibility with aWide range of duct sizes
Compatible with duct smoke detectors for reliable and accurate smoke detection in HVAC Systems

DST1.5BK-DST15

System Sensor DST1.5 Metal Sampling Tube for DNRE and D2E, Duct Widths 1' to 2'

DST1.5|BK-DST15

Key Features

High-quality metal construction for durability and resistance to damage
Easy installation and compatibility with a wide range of duct sizes
Compatible with duct smoke detectors for reliable and accurate smoke detection in HVAC Systems

More Options Available

DST3BK-DST3